14
•
Chapter 2 - Installation
XX176-00-00 Rev 507 VNCTRL-1 Remote Control Panel
After running the ViconNet application and logging in, you will need to click the Controls button and select the
local system to start the control panel. When the VNCTRL-1 is recognized in the ViconNet system, the
following displays in the Control dialog Display area on the ViconNet Main Window. The only active buttons
on this display are Show/Hide instructions and Setup. Start record and Start copy must be activated from the
remote VNCTRL-1. The connection status displays if the unit is On line or Off line.
Note: The VNCTRL-1 will have to be started each time the application is started or logged off.
After ViconNet is setup for the unit, it is necessary to configure the software files related to the VNCTRL-1
Control Panel. Refer to Appendix 1 for this procedure.
Controls
Button