Vicon VN-755IP, Руководство по установке и эксплуатации

Страница: 6 / 28

2
PRECAUTIONS
1. Installation of the camera must be performed by qualified service personnel in accordance with all
local and national electrical and mechanical codes.
2. Do not attempt to disassemble the camera. In order to prevent electric shock, do not remove screws
or cover. There are no user-serviceable parts inside.
3. Handle the camera with care. The camera could be damaged by improper handling or storage.
4. Do not expose the camera to rain or moisture, or try to operate it in wet areas. Take immediate
action if the camera becomes wet. Turn the power off and refer servicing to qualified service
personnel. Moisture can damage the camera and also create a danger of electric shock.
5. Do not use strong or abrasive detergents when cleaning the camera body.
Use a dry cloth to clean the camera when dirty. In a case where the dirt is hard to remove, use a
mild detergent and wipe gently.
6. Never point the camera toward the sun. Whether the camera is used outdoors or not, never point it
toward the sun. Use caution when operating the camera in the vicinity of spot lights or other bright
lights and light reflecting objects.
7. Do not operate the camera beyond its temperature, humidity or power source ratings.
Do not use the camera in an extreme environment where high temperature or high humidity exists.
Use the camera under conditions where temperatures are between 14°F~122°F (-10°C~+50°C), and
humidity is below 85%. For the correct power supply, refer to the specification sheet.
8. If using 24 VAC power adapter, only use the 24 VAC UL Listed Class 2 power transformer.
9. Only use a Listed Class 2 power source.
Caution: To prevent fire or shock hazard, UL listed wire VW-1, style 1007 should be used for the
cable.
PACKING LIST
1. Iris lens connector plug for DC drive – 1 pc
2. Dust protective cap – 1 pc
3. Ferrite clamp – 2 pc
4. Manual – 1 pc
5. Installation CDs – 2 pc
XX156-00-01 Rev 705 VN-755IP Camera