Vicon VN-755IP, Руководство по установке и эксплуатации

Страница: 10 / 28

6
6. POWER IN (24 VAC)
This terminal accepts 24 VAC power source. Recommended power supply is minimum 9 W.
Caution: To prevent fire or shock hazard, UL Listed wire VW-1, style 1007 should be used for the
cable for 24 VAC input terminal.
6. STATUS
This LED indicates that there is connection to the Network. If the cable is connected properly, the green
LED light is on.
7. NETWORK LED
With the proper connection, the LED blinks when sending or receiving data.
8. POWER INDICATOR LED
This LED turns ON only when power is supplied and the DC-DC converter (or the regulator) inside the
camera works properly.
9. MODE SELECT SWITCH
1. FL (flickerless) ON/OFF Switch
This function is only used in Japan. When set to ON, the shutter speed is fixed at a rate of
1/100 (120) sec.
2. BLC (Backlight Compensation) ON/OFF Switch
If the subject you wish to view is too dim because of a bright background, set the BLC switch (Pole 3)
to ON to compensate for the bright background. With BLC on, the background brightness may
saturate in some cases. This function may not operate properly if the object is too small compared to
the area of the background. This function can be used with either the linear shutter (EE/ELC mode)
or an autoiris lens (AI lens/ALC mode).
XX156-00-01 Rev 705 VN-755IP Camera