Quick Guide
|
17
Exiting
Exiting is performed when you want to exit the ViconNet application.
To close ViconNet and exit to the operating system:
Either:
•
Click the Setup button at the top of the Main screen to display the
Setup Site Selection
window and click the
Exit to O.S.
button.
OR
•
Click the
X
button on the Main window toolbar. In the confirmation
window displayed, click
Yes
to exit (close) the application.
OR
Click Logout at the top of the Main Window Toolbar to display the Login
window and click
Exit.
Viewing and Listening to Video
Step 1: Selecting the Display Mode
Selecting the display mode enables you to determine the maximum
number of video display locations for viewing and listening to live
video and audio at one time in the Video Display area of the Main
window. The VJP NVR supports up to 6 cameras. The VZN NVRs
support up to 16 or 24 cameras, model dependant.
Note
The ViconNet JUMP does not support local display. It can be used
with the ViconNet Web Viewer to view local video (refer to
Using the
Web Viewer
at the end of this manual).
Various display modes are provided to accommodate your viewing and
listening requirements, and you can change the display mode after
beginning to view and listen to the live video and audio, without affecting
the video and audio to which you are currently viewing and listening.
You can choose the display mode from either the Main window or the
Navigator window.
To select the display mode from the Navigator window:
In the Navigator window, select the required Display Mode icon (located
below the Navigator window Recorded Device Contents area).