V9360W Hemispheric Camera with Advanced WDR
Hardware User’s Manual
7. From the Setup Page, select IP Settings -> Connection Type.
8. Change the IP mode to Static.
9. Change the IP to 192.168.0.102 or any other unused IPs. Do NOT use the PC’s IP
address or 192.168.0.100. If this is not the first device you add to the network, please
also avoid other devices’ IPs.
10. Click Apply.
11. Go to System -> Save & Reboot, and click Apply. Internet Explorer will close after a few
seconds. This is normal.
12. Wait for 30 seconds and open Internet Explorer again to connect to the new IP (in this
example, 192.168.0.101). For the second device or more being added into the network,
enter the correct IP.
13. Adjust the default Video setting by going to Video & Audio.
16
