V9360W Hemispheric Camera with Advanced WDR
Hardware User’s Manual
2. Installation Procedure
Connecting the IP Hemispheric Camera
1) Remove the cover
Remove the dome cover with special hex wrench provided in the accessory kit.
2) Insert the cable
There are two conduit holes on the hemispheric camera, one on the bottom and the other on
the side. Remove the plug if the cable will be routed through the hole on the bottom of the
hemispheric camera. Route the necessary cables to the installation site.
3) Connect cables to connectors
Follow the instructions in the Physical Description section for how to connect each connector.
10
