V9360W Hemispheric Camera with Advanced WDR
Hardware User’s Manual
Adjust the viewing angle and focus of the camera; reattach the dome cover and tighten using
the screws.
A fully waterproof installation is now complete.
Using the V9360-WM Wall Mount
If it is required to mount the V9360W to a wall, use the V9360-WM. Typical mounting hardware
is provided; be sure to use mounting hardware appropriate for the mounting surface.
1. A mounting template is provided with the wall mount. Mark the mounting holes on the
surface and drill mounting holes. Mount the flat side of the V9360-WM to the wall, with
the wide end (with the cable hole) at the top, using appropriate hardware for the
surface; be sure to use anchors as needed. Cables can be routed through the back
slot or through the access hole.
2. Remove the camera cover if not already done. Align the three (3) holes on the bottom
of the V9360W with the mounting posts of the V9360-WM. Secure with the screws
provided. Reattach the cover.
13
