INSTALLATION
1. Loosen the four Torx screws located midway up the front of the housing.
Leave the screws intact.
(Fig. 1)
2. Drill the mounting location using the supplied drilling guide label.
(Fig. 3)
3. Attach the housing to the ceiling using suitable fasteners, M6x35 tapping screws are
supplied. only use if they are suitable.
(Fig. 3)
4. Reattach the housing and tighten the Torx screws.
(Fig. 2)
Torx screws
M5x10 (4x)
Seal around the
housing base tightly
using the silicon
rubber Torx screws
Figure 1
Figure 2
8
Figure 3
