Vicon V662V-312D, Инструкция по установке и эксплуатации

Страница: 7 / 23

CAMERA CONNECTIONS
Connection Cable Description
COLOR Description
RED AC24V/DC12V
WHITE AC24V/DC12V
ORANGE NC
BROWN NC
BLUE RS485(-)
GREEN RS485(+)
YELLOW ALARM OUT
GRAY DN EXT-IN
BLACK&WHITE DN EXT-OUT
BLACK GND
SKY BLUE UTP+(optional)
PINK UTP- (optional)
1) External Day/Night Control : To select Day/Night mode using external equipment,
by connecting control lines to the appropriate terminals.

DAY&NIGHT OUTPUT (Black&White)
Used to connect an external IR LED for additional illumination when Day/Night
mode is set to AUTO. Controlled by AGC sensitivity.

DAY&NIGHT EXTERNAL INPUT (Gray)
Used to connect an external light sensor to the camera to provide an on/off
signal, when Day/Night mode is set to External.
DAY&NIGHT INPUT Gray
GND Black
Close contact: NIGHT
Open contact: DAY
●
●
GND Black
DAY&NIG Black&White
●
5V/10mA : IR LED ON (NIGHT)
●
0V : IR LED OFF (DAY)
2) Alarm Out
- TTL level

Motion detection signals are output through this port. (YELLOW AND GND)

Active state is configurable.
3) Power Input Terminal

RED & WHITE : DC Power is recommended to use the DC power supply that
can support inrush current over 0.75A
4) Camera Control

GREEN : RS 485+

BLUE : RS 485-
5) UTP (optional)

Video signal through out the UTP Cable (SKY BLUE(+) & PINK(-) )
7