13
Face Trace : Face Trace mode on.
Tracks face through a scene and generate an alarm.
Sens Down : lower value is more widen the scope to judge face. (0~127)
Min Size : Minimum face size configuration (0 : minimum face size is to
none)
Depending upon overall conditions, Face Trace may produce inaccurate results.
Mine : By this function, User can draw motion detection area with free dotting
Set Mine : Press the Enter button to Set Mine mode.
< > : Move : Mine Zone move using the Left and Right buttons.
UP:Set : Mine Zone setting using the Up button.
DN:Clr : Mine Zone clear using the Down buttons.
ENT:End : Press the Enter button to set Mine mode end.
Clr All : Press the Enter button to set Mine area clear.
Display : Select Mine Display On/Off.
Absent : Press the Enter button to Absent detection mode. Detect object
appeared or removed the scene
Sens Down : Adjust sensitivity of Absent check(0-255).
Low luminance, object color and object size can affect accuracy.
Cross : Cross counting mode
Zone : Select Cross Zone using the Left and Right buttons (Zone 1, Zone
2).
Size : Adjust the size of the Cross zone.
Posi : Adjust the position of the Cross zone.
Direction : Select Cross Direction.
Alarm Cnt : Set alarm out cross count. Alarm count number is delaying
number before output alarm.
Reset Cnt : Cross count reset.
Fast moving objects will affect counting.
Expand or decrease the detection zone area to compensate for this.
Long objects will affect counting accuracy.
Expand or decrease the detection zone area to compensate for this.
Multiple objects passing through the detection zone will affect accuracy.
