6
••••
Maintenance
X935 Rev 500 V894CSH/V894WSH High-Security Cameras
Final Installation Steps
The last installation steps include repositioning the camera and fastening the outer housing in place.
1. If the camera was removed or tilted during the cable connection, reinstall the camera and retilt it until it is
directed at about the center of the black mask on the inside of the housing window. It is best if the picture
from the camera can be viewed on a monitor for this procedure in order to achieve the best positioning of
the camera.
2. Secure the outer housing with the three (V894CSH) or four (V894WSH) tamperproof screws provided. A
screw locking compound such as Loctite™ is recommended. Save the special tool and the two spare
tamperproof screws.
Maintenance
The V894CSH and V894WSH require no maintenance except the occasional cleaning of the housing and
window. Use a soft cloth and plain soap and water. Do not use abrasive cleansers that can scratch the window
surface or the finish on the housing.
Fuse Replacement
There is a fuse located in the V894CSH/WSH. When necessary, replace it with a fuse of the same value,
0.5 A, 250 V 5x20 mm slo blo.
