Outdoor Dome Series | Quick Guide
5
No.
Name
Description
1
Camera Bottom Case
Bottom base of the camera dome.
2
Camera Module
The physical main body of the camera.
3
Screws of Camera
Bottom Case
(3x)
Screws for fixing camera module to the camera bottom case.
4
IR Board
The IR LED embedded board for illumination under low-light
environment.
5
Inner Liner
The inner adjustable liner to cover for camera lens assembly (for
aesthetic purposes).
6
Screws of Camera
Housing (3x)
Screws for fixing camera housing to the camera bottom case.
7
Camera Housing
The top cover of the camera.
8
Conduit Hole Plug Cover
To close the unused conduit hole (delivered pre-installed).
9
Black
Conduit Hole
Rubber Grommet
For water and dust ingress protection;
must
be used when the
cables are run directly into the Side Conduit Hole to prevent water
leakage issue. Use plug 8 on the bottom hole.
10
Gray
Conduit Hole
Rubber Grommet
For water and dust ingress protection;
must
be used when the
cables are run directly into the Bottom Conduit Hole to prevent water
leakage issue. Use plug 8 on the on the side hole.
11
Bottom Conduit Hole
The bottom hole for cable entry
12
Side Conduit Hole
The side hole for cable entry.
Table 1 - 1: Parts Pictorial Index Description
Definition
