Outdoor Dome Series | Quick Guide
14
2.2.6 Positioning the Camera
⚫
Pan Adjustment (A)
Rotate the lens camera assembly to the desired field of view. Note that the camera lens should not be
rotated further than the point where the side conduit hole of the camera bottom case is located.
⚫
Horizontal Rotation (B)
Rotate the lens camera assembly in the camera module; do not turn assembly more than 355°, as this
may cause the internal cables to be twisted, disconnected or broken. In addition, pay attention to the
location upon which the light sensor (
1
) is located, since excessive rotation, in certain cases, results in
obstruction to light sensor by the IR reflection shield (
2
). Check the Orientation section in
User’s Manual
when 180° above rotation is necessary, for swift orientation adjustment.
⚫
Tilt Adjustment (C)
Lift to open the inner liner and tilt the camera lens to the desired angle. Restore the inner liner back to its
default position after adjustment.
Figure 2 - 8: Positioning the Camera
Caution
Limitation for three axes position:
Pan range: 0°
～
370°
Rotation range: 0°
～
355°
Tilt range: 15°
～
90°
A
B
C
2
1
