Outdoor Dome Series | Quick Guide
9
2.2.2 Disassembling the Camera
Refer to the steps and figure below for correct disassembly order of the camera.
1.
Loosen the 3 screws of camera housing turning counterclockwise using the T20 security torx bit.
2.
Gently pull the camera housing downward to separate it from the camera body.
DO NOT
remove the camera from the camera bottom case during installation. The camera has been
designed to allow for installation without removing camera module from back box.
Figure 2 - 1: Disassembling the Camera
1
2
