Outdoor Dome Series | Quick Guide
11
Figure 2 - 3: Connecting Ethernet Cable Figure 2 - 4: Connecting BNC Cable
3.
Insert audio in/out cables and alarm in/out cables to the corresponding terminals of the camera, if required.
NOTE:
It is recommended to connect external microphones to ground (GND) on the digital I/O connector.
4.
Refer to
Figure 1 - 3: Internal Interface Pictorial Index
for details on I/O interface.
5.
If using the supplied rubber grommet (recommended), puncture a round hole(s) in the grommet that is
smaller than the diameter of the cable that will be passed through the grommet. Feed an unterminated
cable through the hole in the grommet. Terminate the cable with the appropriate connector. Refer to
Figure 2-5.
Figure 2 - 5: Using Rubber Grommet
