Chapter 3
Installation
For novice or first-time installers, these steps provide the most thorough and accurate instructions.
About This Chapter
This chapter details the complete installation of the Kollector Network Server. The following sections provide
information as follows:
•
Unpacking the Server
defines how to remove the unit and accessories from the box.
•
Required Items for Installation
defines items needed for installation.
•
Unit Components
defines all connections on the front and rear panels and their use.
•
Mounting
defines all methods of securing the recorder for permanent use.
•
Installing the Kollector Network Server
describes how to install all necessary peripheral devices
directly to the server, as well as how to install all necessary peripheral devices to the Termination Boxes
Unpacking the Server
Carefully open the carton. Remove the Accessory Kit and the all components from the box and place them on
a large, flat working surface. Open the Accessory Kit and verify the contents against the list in Table 1-1,
page 2.
Required Items for Installation
To properly install the server there must be simple hand tools available such as a screwdriver, wrenches,
pliers and wire cutters/strippers. To setup the server for operation there must be a keyboard available to
operate the GUI.
4
•
Installation
XX155-01-00 Rev 1105 Kollector Network Server
