6
7
CONDITION OF SALE
As a condition of sale, the purchaser assumes
responsibility for the proper use and care of this
appliance in accordance with these printed instructions.
The purchaser or user must judge himself or herself
when to use the appliance and the length or use.
NOTE: IF YOU EXPERIENCE A PROBLEM WITH
YOUR INHALER PLEASE SEE WARRANTY FOR
INSTRUCTIONS. PLEASE DO NOT ATTEMPT TO REPAIR
THE INHALER YOURSELF. DOING SO WILL VOID
THE WARRANTY AND COULD CAUSE DAMAGE OR
PERSONAL INJURY.
This product carries the CE mark and is manufactured
in conformity with the Electromagnetic Directive
2014/30/EU, the Low Voltage Directive 2014/35/EU and
the RoHS Directive 2011/65/EU.
Technical specifications are subject to change.
VH200E
220-240V ~ 50-60Hz
70W
TROUBLE SHOOTING
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
Power switch is set to “on” and
Power Light is off
Unit not plugged in.
Plug unit in.
No power at outlet.
Check circuits, fuses, try a different
outlet.
Water overflows from Water
Reservoir
Unit has been filled above max
fill line.
Empty unit. dry and then refill
taking care not to fill past the max
fill line.
Inhaler produces only little
mist or no mist
No water in Water Reservoir.
Fill the Water Reservoir.
The unit is not placed on a firm,
level surface.
Place the Inhaler on a firm, level
surface.
Mineral deposits on Heating
Element.
Clean or disinfect the Heating
Element.
The Water Reservoir was washed
with a washing liquid and not
rinsed thouroughly.
Empty the water and rinse
thoroughly with warm water.
ENG
LISH
