background image

9

1) When the thermometer is turned on or off,, press the MEMO button to view the 

history of measured values.

2) An empty memory cell shows “----°C” or “----°F”.

3) Temperature readings can be stored in memory. Up to 50 temperature readings can 

be stored into the memory cells and automatically overwrite historical data.

4) While the thermometer is on, press the MEMO button until the LCD display “CLR”, 

which means that all stored data is cleared completely.

Changing the Temperature Scale – F1 

Turn the thermometer on, press and hold the SET button to enter F1, press the “MODE” or 

“MEMO” button to switch Celsius and Fahrenheit temperature units, press the trigger to 

confirm the unit settings (factory default is Fahrenheit)

Turning the Sound On/Off 

While the thermometer is turned on, press the SET button to turn on or off the prompt 

sound function.

Advanced Settings: 

Warning: The following settings are only meant to be used by professionals. 

It is recommended to keep this thermometer at the settings originally 

programed on the device. 

Fever Alert Set – F2 

This setting will change at what point the backlight color of the temperature reading 

turns to red. After entering the screen for changing the temperature scale, F1, press 

the “SET” button to enter F2. Press the “MODE” button to decrease this value by 0.1°C 

(~0.2°F). Press the “MEMO” button to increase this value by 0.1°C (~0.2°F). Press 

the “SET” button to save the setting. The factory default and highly recommended 

temperature to have this set at is 38.5°C (101.2°F). 

Sound Settings – F3 

This setting will change the buzzer to be on or off. While in Fever Alert Setting, F2, press 

the “SET” button to enter F3. Press the “MODE” or the “MEMO” button to turn the volume 

on or off. Press the “SET” button to save this setting. This can also be changed using the 

directions outlined in “Turning the Sound On/Off”. 

Factory Reset

If at any point you want to return your thermometer to the factory settings ,while 

thermometer is turned on, press and hold the “MODE” button until the LCD displays “rst”. 

After 2 seconds the factory settings will be restored to the device.

Содержание A005127R2






































Отзывы: