6
7
How To Use The Vicks No Touch For Food & Bath Temperatures
1. Select Surface Temperature Setting
With the device powered On, press the MODE button to switch
from human to surface temperature. The screen will change
from “body” to “surface temp” on the top of the LCD screen.
2. Position
Position thermometer 0.4-2 inches (1-5 cm) away from food or bath water. Ensure
that you are aiming directly at the food or bath water and not at the food container
or walls of the bath tub. Ensure that the thermometer is not directly in-line of steam,
as this can impact reading.
DO NOT
touch food or bath water with the thermometer.
3. Take Temperature
Press the POWER button to take a temperature measurement.
4. Read Temperature
A confirmation beep will be heard, indicating the measurement
is complete. The temperature measurement will be displayed on
the LCD screen.
Note: The backlight will be green regardless of temperature
measurement when in food/bath mode.
How To View Temperatures In Memory
Press the “MEMO” button to view previous temperatures.
The previous 10 temperatures can be displayed on the LCD
screen. The most recent temperature taken will be the first
temperature displayed after pressing the “MEMO” button.
To view the next most recent temperature taken, press the
“MEMO” button again.
To clear the memory of previous temperatures, press and hold
the “MEMO” button for 4 seconds.
Change From Fahrenheit To Celsius
Press and hold the MODE button for
3 seconds. The LCD screen will display the
word “Unit” in the center of the screen and
“°F” in the right top corner.
Press the MODE button to change from
°F to °C and then MEMO button to save setting.
How To Turn Off Sound
After setting the Fahrenheit/Celsius setting the screen will then
change to the Mute function. The display will show the speaker
icon and the word “On.” Press the MODE button to change to “Off”
to mute the sound. Press the MEMO button to save selection.
Changing The Batteries
The No Touch thermometer comes with 2 AAA batteries.
Replace with 2 new AAA batteries when the flashing battery symbol appears on
the LCD screen. To change the batteries, slide open the battery cover and remove
batteries. Replace the batteries being sure to align properly as indicated inside the
battery compartment. Remove the batteries from the thermometer if it will not be
used for an extended period of time to avoid damage to the product resulting from
a leaking battery.
To protect the environment, dispose of empty batteries at appropriate
collection sites according to national or local regulations.
