Page 1 - Set RID, PAN ID and RF Channel in E528.4G and E527.4G
Set Room ID, PAN ID and RF Channel in INNCOM
E528.4G and E527.4G Thermostats
Enter Service Mode
Service mode is accessed by executing the following button sequence:
1.
Press and
hold
F/C.
2.
Press and release OFF/AUTO.
3.
Press and release DISPLAY.
4.
Release F/C.
The LCD display will now read “rid” confirming that you are in service mode.
Set Room ID
A unique 5-digit Room ID is required in each INNCOM thermostat.
Enter Service Mode and follow the procedure below to set the Room ID of the thermostat.
1.
Scroll to
rId
2.
Press
DISPLAY
button and the current Room ID will scroll on the display.
3.
After the Room ID scrolls, the highest digit of the Room ID will be displayed with the
HI
fan indicator. Use the up or down arrow buttons to change the value and press
OFF/AUTO
.
4.
The next 2 digits of the Room ID are now displayed along with the
MED
fan indicator.
Use the up or down arrow buttons to change the value and press
OFF/AUTO.
5.
The last 2 digits of the Room ID are now displayed along with the
LO
fan indicator
Use the up or down arrow buttons to change the value and press
OFF/AUTO
.
6.
Press the
DISPLAY
button to store the new Room ID. The new Room ID will scroll
across the display.
Example of RID for Room 515 (00515)
