/Memo
/Memo
Set/D T
Please read the instructions carefully before you begin use.
ibasal Thermometer Instructions
Set/D T
/Memo
Grph/ck
Mode
START
Del
/
Set/D T
/Memo
Grph/ck
Mode
START
Del
/
Set/D T
/Memo
Grph/ck
Mode
START
Del
/
Button Key:
Delete button
Set button/D T
Grph/Ck
Mode
Set/D T
/Memo
START
Del
Graph/Check button
Mode button
Display Window
Start measurement
Reset
button
Temperature
probe
back side
/
Set/D T
/Memo
Grph/ck
Mode
START
Del
/
Set/D T
Grph/ck
Mode
START
Del
/
Grph/Ck
Mode
START
Del
/
Left Arrow/Memo button
*
- Page 1 -
Computerized Basal Body Thermometer (BBT)
1. Starting your first cycle
IMPORTANT:
You can begin using the ibasal as soon as you receive it to familiarize yourself
with the process. The ibasal considers your first cycle to be a practice cycle and does not
calculate fertility predictions or your average temperature. Please note, however, that you can
still input your basal temperatures at OvaGraph.com during this first cycle and interpret them
manually. To begin taking your temperature, remove the protective film. Set date, time and
alarm so you can begin use the next day.
When you remove the protective film, the ibasal will automatically mark today as
cycle day 1.
Please note:
it is okay if the cycle day on the ibasal does not correctly
match with your actual cycle day. When you start your next cycle, follow the
instructions in the section called “Starting your second cycle.”
2. Getting ready to use the ibasal
Turn the device over and pull off the battery cover.
Pull and remove the cellophane protection film to turn
on the device. You will hear a beep and the display will
appear in the display window. Once the ibasal is
powered on, it will stay on.
Inserting the battery
If the display does not appear, press the Reset button
or take out the battery once and insert it again.
Remove the
cellophane film
Bar graph blinks
alternately
Slide the battery cover
Take out the battery here
Delete the measurement
Correct the 1st day of
menstruation
Delete the 1st day of
menstruation
1st day of menstruation
Deleting the memo
Setting the alarm
Setting the clock
ibasal Symbols
Heart/Right Arrow button
You must set the clock and alarm before you begin use.
Select with the Set button. The selected symbol will blink.
Set the year, month, day, hour and minute. The year
will blink. Use the left and right arrow buttons to adjust
the year. Once it is correct, press the Set button to save.
It will then move to the next value that you will need to
modify. Continue the same pattern to set the month,
day, hour and minute correctly.
Please note: if you do not press any buttons for
one minute, the screen will return to the original
display. If this occurs, please follow the steps to
proceed to the setting you were adjusting.
Left arrow
Right arrow
1. Setting the time and date
2. Setting the alarm clock
Press the Mode button. Symbols appear in the display.
Select with the Right arrow button. Confirm with the Set button.
Set the alarm hour and minute. First set the alarm
hour using the left and right arrows, and press Set
to save. Follow the same process when settng the
minute.
Only set the alarm once you are ready for use.
Otherwise, keep the alarm set to OFF by
scrolling through the hours until you see OFF
appear on the screen. Press Set. In order to
store data, you must take your reading each
morning when the alarm sounds.
You cannot measure your temperature without setting the alarm.
If you do not take your reading when the alarm sounds, the alarm
will continue for 10 minutes and then shut off for the day.
“Alarm OFF” will blink
“Alarm minute” will blink
“Alarm hour” will blink
The selected symbol will blink
“Year” will blink
“Month” will blink
“Day” will blink
“Hour” will blink
“Minute” will blink
