Vibra ALE-NC Series, Руководство по эксплуатации

Страница: 12 / 108

1 Prior to use ALE-NC series operation manual
－
2
－
■
Do not mix old and new batteries, or batteries of different types or manufacturers.
■
Do not use the batteries that leak.
■
Make sure you insert batteries with the positive and negative poles correctly
inserted and be careful of short circuits.
Such mishandling could damage the batteries and may lead to harmful liquid leakage or rupture.
■
Observe the precautions printed on the batteries used.
■
Do not apply excessive force to or impact the balance.
Doing so could damage or result in failure of the balance. Carefully place samples on the balance.
■
Do not use volatile solvents.
The main unit could deform. Wipe the main unit using dry cloth or a cloth moistened with a small amount
of neutral detergent.
■
Do not handle the balance with wet hands.
That may cause short-circuiting or failure.
■
Do not use the balance in a wet location.
That may cause short-circuiting or failure.
■
Do not connect to the AC adapter cord or communication cable with its connector or
jack being wet.
That may cause short-circuiting or failure.
■
Do not install the balance in a place where it is directly exposed to airflow from
air-conditioning or heating equipment.
Due to changes in the ambient temperature, the balance could fail to accurately weigh samples.
■
Do not install the balance in a place exposed to direct sunlight.
The internal temperature of the balance could rise and the balance could fail to accurately weigh samples.
■
Do not install the balance where the floor is soft.
When a sample is placed on the balance, the balance could slant and fail to accurately weigh samples.
■
Do not install the balance in a place where the ambient temperature or humidity
change significantly
.
The balance could fail to accurately weigh samples.
■
Dispose of batteries in accordance with local regulations.
■
If the balance is not going to be used for a long time, store it with the batteries
removed.
■
Adjust (calibrate) the balance when it is installed or relocated.
Failure to do so might result in measurement errors. To ensure accurate measurements be sure to adjust
(calibrate) the balance.
■
Check for an error periodically.
Use environment and chronological change cause an error in measured value, leading to an inaccurate
measurement.
■
Unplug the AC adapter from the receptacle when the balance is not going to be used
for a long period of time.
Unplug the balance from the receptacle to save energy and prevent degradation.
■
Always adjust the level of the balance before use.
A tilted balance generates errors which might cause inaccurate weighting.