Salter 311, Инструкция по эксплуатации

Страница: 1 / 8

311 Electronic Office Scale
User Instructions
Operation
1. Place the supplied batteries in the battery compartment on the bottom of
the scale. Be sure to observe battery polarity marked inside the
compartment. Replace the compartment cover.
2. Place the scale on a flat, stable surface.
3. Press the ON/TARE button.
When 0 appears, the scale is ready for weighing. See Changing Unit
of Measure below.
4. Turn the scale off by pressing the OFF button.
To perform a Tare
1. Place a container on the platform for taring and press the ON/TARE
button.
The display will return to zero, eliminating the weight of the container.
2. Put the material or object to be weighed in the container.
The net weight will be displayed.
3. Remove everything from the scale.
The display will show a negative weight.
4. Press ON/TARE again to remove the tare weight.
Scale weight returns to 0 .
Auto Off
To save battery power, the scale turns off automatically approximately one and
a half minutes after the last key press or weight change.
Changing Unit of Measure
Press the UNITS button to change the unit of measure from g to kg to lb/oz.