Viavi ONX-220, Руководство пользователя

Страница: 96 / 212

ONX-220 User's Guide
22135173, Rev. 000 June 2020 96
Chapter 5 Ethernet Testing
Saving test profiles
After specifying the test settings, you can save them as a test profile.
1. Press the Save button.
2. Enter a name for the profile.
3. Specify whether the profile will be shown on the Home screen.
4. Press
Save . The profile is saved.
Connecting to the line
After specifying the test settings, you can connect to the line.
1. Connect one end of an Ethernet cable to the Ethernet jack on the right side of the unit.
2. Connect the other end of the cable to an Ethernet jack.
Viewing results
After specifying test settings and connecting to the line, you can view results.
1. Press the Connection Details button. Do one of the following:
– Press Cancel to return to the Network menu, and then select Network Status
or LAN Stats .
– From the Network Setup menu, press the left arrow to go to the LAN Results
menu, and then the left arrow again to go to the Network Status menu.
2. To save a test report, press the Tray button, and select Save Report. Specify the
report settings such as report name, report format, technician ID, location, and other
settings as needed.
3. To clear the results, use the asterisk (*) key.
See Chapter 10: Test Results to learn what your results mean.
CAUTION: FAULTY RESULTS
Any time the Network settings are changed, the network layer
resets. If you change these settings during a test, you may
cause errors in the test. Only change them before you begin a
test.