Chapter 1
Getting started
Attaching components
ONA-800 Getting Started Guide
Page 8
22142812, R011
April 2022
2
Place the unit so that you have access to the back and remove the termination
cover by removing the screws that hold it in place.
3
Set the module onto the screen, ensuring the mating connectors between the two
pieces are aligned, as shown in
Figure 8
Module to screen
4
Insert the hex key in the brass fittings on the rear of the module and tighten the
internal captive fasteners to secure the module to the display.
5
Place the ONA-800 base onto the module, ensuring the mating connectors are
aligned, as shown in
.
Figure 9
ONA-800 base to module
6
Using the hex key, tighten the captive fasteners on the rear of the base that
secure it to the module.
7
Re-attach the expansion modules or back cover.
Expansion modules
You can attach the following expansion modules to the ONA-800:
Содержание OneAdvisor ONA-800
Страница 1: ...ONA 800 Getting Started Guide R011 ...
Страница 2: ......
Страница 4: ...ONA 800 Getting Started Guide Page iv 22142812 R011 April 2022 ...
Страница 74: ......
