Viavi OneAdvisor ONA-800, Руководство по началу работы

Страница: 25 / 75

Chapter 1
Getting started
Attaching components
ONA-800 Getting Started Guide
Page 6 22142812, R011 April 2022
Charging the PEM
You can charge the PEM:
• On its own using the charger input, using the same adapter that ships with the
ONA-800
• When connected to the ONA-800
Attaching components
The following sections describe how to install components to the ONA-800 base.
Attaching the screen
The following procedure describes how to attach the screen to the ONA-800 base unit.
To attach the screen to the base unit
1 Set the screen onto the base, ensuring the mating connectors between the two
pieces are aligned, as shown in Figure 6 .
Figure 6 Set screen to base
2 Set unit so you have access to the back. Using the Hex Key located in the
groove on the back panel of the screen, tighten the four fasteners, as
shown in Figure 7 .