Viavi mA-3011 Скачать руководство пользователя

Страница: 54 / 64

Chapter 6 Care and Maintenance

Maintaining the Device

Rev. C0

mA-3011 AXIe Embedded Host Module Operation Guide

April 2020

Page 6-5

The Installation Options section of the window shows software that is contained in

the upgrade tool as well as devices that have pending upgrades.

If a device is not auto-detected, select the device from the Devices to Upgrade

section of the window and press the Add Device button.

Select the Install button to continue.

Wait while the system performs a series of automated processes. This will take

several minutes.

Figure 6-2

VIAVI Software Upgrade Tool Window

NOTE

Double click on the IP Address of new device to edit the device’s IP Address.
When updating a Dual mA-3011, each CPU will appear as a separate device. The

upgrade tool will update both CPU’s. If you do not want to update one of the CPU’s,

de-select the Upgrade tick box.

NOTE

Do not interrupt the upgrade process or the upgrade will not be completed properly.

Содержание mA-3011

































































Результаты поиска

Содержание mA-3011

Отзывы:

Похожие инструкции для mA-3011

Бренды по названию

Популярные бренды

Viavi mA-3011, Руководство по эксплуатации

Результаты поиска

Содержание mA-3011

Отзывы:

Похожие инструкции для mA-3011

Бренды по названию

Популярные бренды