How to attach the rails | 13
Figure 10: Installing the rails
Figure 11: Installing the rails
Caution:
Do not pick up the server with the front handles. They are designed to pull the
system from a rack only.
4.
Install the outer rails onto the rack. Each end of the assembled outer rail inlcudes a bracket
with square pegs to fit into your rack holes. If you have an older rack with round holes,
modification kits are available.
a.
Align the square pegs on the front end of the rail with the square holes on the front
of the rack. Push the rail into the rack until the quick release bracket snaps into place
securing the rail to the tack. Keep the rail horizontal.
b.
Adjust the rail to reach just past the full depth of your rack making sure that the rear
bracket is level with the front bracket.
c.
Align the square pegs on the rear end of the rail to the holes on the rack and push the
rail into the rack until the quick release bracket snaps into place, securing the rail to the
rack.
d.
Repeat the procedure for the other outer rail assembly.
