Viavi CAA06M Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 96

background image

About CAA06M Cable and Antenna Analyzer

2

Specifications, terms, and conditions are subject to change without notice. The provision of hardware,
services, and/or software are subject to VIAVI standard terms and conditions, available at

www.viavisolutions.com/en/terms-and-conditions

Open source disclaimer - IMPORTANT READ CAREFULLY

The CAA06M Cable and Antenna Analyzer includes third party software licensed under the terms of
separate open source software licenses. By using this software you agree to comply with the terms and
conditions of the applicable open source software licenses. Software originated by VIAVI is not subject to
third party licenses. Terms of the VIAVI Software License different from applicable third party licenses are
offered by VIAVI alone.

Safety and compliance information

Safety consideration

It is mandatory to permanently connect this product to the protective earth.

When powering this instrument externally, always use an AC power cable that includes an earth (safety)
ground connection, which is shipped with your instrument.

The authority to operate this product is conditioned by the requirements that no modifications be made to
the equipment unless the changes or modifications are expressly approved by VIAVI.

Caution:

– To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm
must be maintained between the antenna of this device and all person.

– This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.

Industry Canada requirements

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.

This Class A digital apparatus complies with Canadian standard ICES-003.

Le présent appareil numérique de classe A est conforme à la norme ICES-003 du Canada.

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.

«
...
9
10
11
12
13
...
»

Содержание CAA06M

































































































Отзывы:

Нет отзывов

Похожие инструкции для CAA06M

Бренд: RayTek Страницы: 72

Бренд: Magnetrol Страницы: 40

Бренд: Veeder-Root Страницы: 59

YPP-100 Light Piano

Бренд: Yamaha Страницы: 54

Бренд: Yamaha Страницы: 44

Бренд: Yamaha Страницы: 56

Бренд: Yamaha Страницы: 10

Бренд: Yamaha Страницы: 32

Бренд: Hanna Instruments Страницы: 2

Бренд: Dräger Страницы: 538

Бренд: National Instruments Страницы: 12

Бренд: Cecomp Страницы: 4

Бренд: Datakom Страницы: 2

Бренд: Kawai Страницы: 2

CR-2010 PRO Series

Бренд: G-Tek Страницы: 48

Бренд: Vega Страницы: 20

Бренд: Oceanic Страницы: 9

Бренд: Valor Страницы: 42

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды