Viatran DL Series Analog Input Process Meter Instruction Manual
33
Setting Up the Meter (
setup
)
The
Setup
menu is used to select:
1.
Input signal the meter will accept
2.
Dual-scale feature for some level applications
3.
Select the display units/tags
4.
Decimal point position
5.
Programming
Menu
6.
Display parameter and intensity
7.
Relay
operation
8.
4-20 mA analog output scaling
Press the Enter button to access any menu or press Up arrow button to
scroll through choices. Press the Menu button to exit at any time.
Note:
Scal 1 & Scal 2 are
displayed instead of
Scale if
d-SCAL
is
selected under the
Setup Input menu.
They correspond to
the PV1 & PV2
scales.
Enter custom
units here
Note:
Use the
d-SCAL
selection
to activate the dual-scale
level feature - PV1 & PV2
(see introduction on page 6).
Set
d-SCAL
to
no
if both
displays are to be used for
anything other than PV1 & PV2.
Содержание DL-ACB0N
Страница 51: ...Viatran DL Series Analog Input Process Meter Instruction Manual 51 Pump Alternation Control Operation ...
Страница 89: ...Viatran DL Series Analog Input Process Meter Instruction Manual 89 Figure 22 1 8 DIN Panel Cutout Template ...
Страница 90: ...Viatran DL Series Analog Input Process Meter Instruction Manual 90 This Page Intentionally Left Blank ...
Страница 91: ...Viatran DL Series Analog Input Process Meter Instruction Manual 91 NOTES ...
