ViaSat SurfBeam 2 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 66

background image

SurfBeam® 2 Pro Portable Terminal Operations Guide

© 2014 ViaSat, Inc.

Page 2-2

All Rights Reserved

1172964, Rev. 002

ViaSat Proprietary Information

2.3

Receiving, Unpacking, and Assembly

2.3.1

Receiving

2.3.1.1

Unpacking and Inspection

CAUTION

: Proper Electrostatic Discharge (ESD) precautions shall be maintained when handling

equipment.

To unpack and inspect the equipment, perform the following procedures:



Inspect the shipping container for damage before unpacking the equipment. Document any obvious dents,
punctures, or other irregularities on the shipping form.



Open the container and remove the packing material on top of the equipment.



While performing the Assembly process, inspect the equipment for external damage including dents and
scratches.



Save the packing material and containers for reshipment and/or servicing.

NOTE

: If the container is damaged, open the container in the presence of the shipping carrier agent if

possible. If damage is found after the equipment is unpacked, retain the container and packing
materials for inspection. This is important if a damage claim must be filed.

CAUTION

: Do not attempt to operate the equipment if major damage is found. In the event

questionable damage (major or otherwise) is identified, contact ViaSat, Inc. for support.

2.3.1.2

Handling and Precautions

CAUTION

: Proper ESD precautions shall be maintained when handling equipment.

CAUTION:

Care must be taken when handling the antenna to prevent damage to the unprotected

Transmit Receive Integrated Assembly (TRIA), modem, semi-rigid cables, and wire bundle.

CAUTION:

Keep all connector covers on the units until ready to install. This will keep units clean from

foreign debris.

CAUTION:

Care must be taken to prevent the cables from being crushed or bent when installing the

Antenna onto its mounting position.

CAUTION:

Care must be taken when handling the antenna to prevent damage to the parabolic reflector,

feed, flexible cables, or any other antenna components.

CAUTION:

The reflector should only be moved in azimuth and elevation by hand, using a slow deliberate

motion. The reflector should never be moved quickly or jerked.

CAUTION:

Before applying power, clear the area around the antenna.

CAUTION:

Before connecting the interface cables to either the modem or the antenna, make sure the

modem power is off. DC power is present on the Receive and Transmit Inter-Facility Link cables when
power is on.

CAUTION:

Always lift Antenna by its base to avoid bending brackets and causing misalignment of

precision assemblies.

«
...
7
8
9
10
11
...
»

Содержание SurfBeam 2



































































Отзывы:

Нет отзывов

Похожие инструкции для SurfBeam 2

MT5656ZDX Series

Бренд: Multitech Страницы: 30

Бренд: H3 System Страницы: 15

Бренд: MikroTik Страницы: 8

Бренд: Comet64 Страницы: 5

Бренд: Buenoptic Страницы: 8

Бренд: Zhone Страницы: 5

Бренд: Comtrol Страницы: 6

RocketModem III

Бренд: Comtrol Страницы: 13

Бренд: Vega Страницы: 27

Бренд: Paradyne Страницы: 125

Бренд: NETGEAR Страницы: 198

NetVito 5300 Series

Бренд: Camatel Страницы: 12

Бренд: Zhone Страницы: 2

Бренд: US Robotics Страницы: 2

Бренд: IPWireless Страницы: 41

Бренд: Campbell Страницы: 56

Ripwave 40-00097-00

Бренд: Navini Networks Страницы: 41

MultiConnect microCell

Бренд: Multitech Страницы: 39

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды