Viasat Business Hotspots Installation Guide
Page | 7
Wall mount
1
Attach the wall mount (inverted stand) to the wall using screws.
2
Slide the wall mount up and pull away from the wall over the screws to remove.
3
With the wider end of the stand at the bottom, insert all four hooks located in the front of the
wall mount into the slots on the back of the phone.
4
Firmly slide the wall mount upward to lock it in place.
5
Pull out and rotate the tab from the handset rest to hold the handset while the phone is
mounted on the wall.
6
Place the wall mount over the screws and slide down to secure.
Step 5 | Install BLF paper label
1
Align the cutouts on the paper label with the plastic notches on the phone and gently lay the paper down on
the phone surface.
2
Install the plastic cover over the paper label by inserting the non-cutout side of the panel. Adjust the plastic
cover in an up/down direction to make the three cutouts on the right side align with the plastic notches.
3
Slightly pull the plastic cover upward.