The 845G MAINBOARD Series
Page 22
Hardware Installation
Jumpers are built on the mainboard to allow the user flexibility to configure the
mainboard settings to meet their specific requirements. When there is no
jumper cap inserted into the jumper it is called “OPEN.” When a cap is inserted
into the jumper it is known as a “SHORT.” Below is an example of a short set-
ting on a jumper.
/0&#"(!
SHORT PIN 1/PIN 2 PIN2/PIN 3
,8?
,8?
Three Pin Jumpers
Open Short
Two Pin Jumpers
2.7.7. VGA Connector
Connector: CN19
Type: 15 pin female
Connect your VGA monitor adapter to this connector.
2.7.8. RJ-45 LAN Connector (only for 845G-MWT)
Connector: CN35
The 845G-MWT comes with onboard 10/100 Mb Fast Ethernet Network. The
RJ-45 connector allows you to easily connect to a Local Area Network
through a network hub.
2.8.1. JP1: Keyboard/Mouse Power On
Type: 3 pin
Default: Pin 1 and Pin 2 short
This jumper allows you to power on your system using your mouse or key-
board. If you short Pin 1 and Pin 2 then the “Keyboard/Mouse Power On”
function will be disabled. If Pin 2 and Pin 3 are short then the “Keyboard/
Mouse Power On” function will be enabled. If you choose to enable this op-
tion then you need to enable the POWER ON field in the Integrated Periph-
erals Menu of the BIOS setup.
