The 845G MAINBOARD Series
Page 19
Hardware Installation
2.5.1. PW: Power On / Off and External Suspend Switch Connector
The Power On/Off connector has two functions. It can be the Power Switch or
Suspend Switch of your PC system. You can either choose “Delay 4 Sec” or
“Instant OFF” (Please refer to the Award BIOS setup instructions in Chapter
3).
Option 1: If you choose “Delay 4 Sec.” In the BIOS CMOS Setup, the func-
tion of “PW” will be:
A. When the system power is "OFF", press this switch, the system will
power on.
B. When system power is "ON”, you can select two different modes: -
Mode 1: Press and hold the Power ON button for less than 4 seconds and then
release it. The system will be turned into Suspend mode (turned into the
GREEN mode) When the system is in the Suspend mode:-
!
Press the Power on button (less than 4 seconds), the system will return
to Full-ON mode.
!
Press and hold the Power On Button for more than 4 seconds, the
system will be powered off.
Mode 2: Press and hold the Power ON button for more than 4 seconds, the
system will be completely powered off.
Option 2: If you choose “Instant OFF.” In the BIOS CMOS Setup, the power
switch will operate like a normal ON / OFF Power button.
The following System Panel Buttons and
LED Connectors can be found at the
front of the mainboard on the left hand
side.
PW= Power On/Off and Suspend Switch
Connector
S3L= STR LED Connector (optional)
HL= HDD LED Connector
RS= Reset Button Connector
'$6
Top View of the System Panel
and LED Connectors
*(
B@&'(#-
*(
B@&'(#-
B@&'(#-
*(
9 &
*(
