14
/
14
8. Restore factory settings
If the mechanical movement of the machine is smooth, but the engraving movement appears stuck, or the stepper
motor does not move, please try to restore the factory settings of the main-board. The recovery method is as follows:
Method 1:
VigoWorks
software (For Windows) and run it.
Click the button
Connect
. After the software connected the machine successfully, click
Settings
. On the settings
window, Click
Restore Factory
button, then reboot the machine.
Method 2:
Run Candle software and send command
$RST=*
to the
machine, then reboot the machine.
9. Assembly video and online guide
Please scan the QR code below to watch the machine assembly video.
If the U disk in the
machine kit can't be read, please scan the QR code to see how to download the
software and related documents.
Powered by VEVOR 2020
S3018 Pro Ver 2.3
