VETRON 5390, Инструкция по эксплуатации

Страница: 47 / 75

44 45
07/2018
VETRON 5390 - POST BED MACHINE - INSTRUCTION BOOK
07/2018
VETRON 5390 - POST BED MACHINE - INSTRUCTION BOOK
NR. PARAMETER DESCRIPTION
» THREAD CLAMP
100
Thread clamp (
5
)
The following function are available:
OFF = Out of action.
ON = In action.
The function of the thread clamp is equal to a thread wiper function. When the
point of the hook is catching the thread loop the clamp will close. The hook will
pull the beginning of the thread down through the material.
NR. PARAMETER DESCRIPTION
» BACKTACK TYPE
110 Stitch in stitch backtack
You can choose between:
OFF = Out of action normal backtack.
ON = In action stitch in stitch backtack.
With a normal backtack the direction is changed during the feeding. The penetra-
tion of the needle is not exactly on top of each other. Will be used for not visible
seams. The stitches will be exactly in the same position with the stitch in stitch
backtack. The feeding will be switched when the machine is standing still. It will
be used for visible backtacks with high quality.
05. PROGRAMMING
04. PROGRAM PARAMETER
-10-14
120 backtack or condensed
stitches at seam start
135 bobbin thread counter
121 A stitch count
122 B stitch count
123 A/B repetition
124
A stitch length
125
B stitch length
126
A/B speed
030 thread tension A 1
010 stitch length 1
020 foot stroke 1
041 speed
027 automatic stroke switch
according to sewing speed
031 thread tension A 2
038 2 nd tension level when
switched to 2 nd stroke
039 release tension on
foot lift
150 thread trimming
153 trim stitch tension
158 trim stitches
159 trim stitch length
050 foot pressure
074 foot position on stop
077 needle position on stop
110
stitch in stitch
140 backtack or condensed
stitches at seam end
100
thread clamp
021 foot stroke 2
141 C stitch count
142 D stitch count
143 C/D repetition
144 C stitch length
145 D stitch length
146 C/D speed
028 automatic stroke switch
speed threshold
029 automatic stroke switch
delay
032 thread tension B 1
034 thread tension based
on material thickness
070 foot lift height
» SEWING PARAMETER
033 thread tension B 2
054
dynamic foot pressure
066 Edge guide hight
060 edge value