VETRON 5390, Инструкция по эксплуатации

Страница: 48 / 75

46 47
07/2018
VETRON 5390 - POST BED MACHINE - INSTRUCTION BOOK
07/2018
VETRON 5390 - POST BED MACHINE - INSTRUCTION BOOK
05. PROGRAMMING
04. PROGRAM PARAMETER
-11-14
NR. PARAMETER DESCRIPTION
» START BACKTACK
120
Backtack or condensed stitches
at seam start
You can choose between:
OFF = No backtack at seam start.
STCONDS = Condensed stitches at seam start. The distance A will be used
for the condensed stitches. The stitch length will be set with
parameter
124 (Distance B is suppressed).
BACKTACK = Backtack with distance A and B.
BACKTACK B = Backtack with distance A and B and A.
Use/Advantage: for different backtack length to stitch length.
121
A stitch count
Can be set from 0 to 100 stitches.
122
B stitch count
Can be set from 0 to 100 stitches.
123
AB repetition
Can be set from 0 to 100 stitches.
Repeats the start backtack depending on adjustment.
124
A stitch length
You can choose between:
STD = Stitch length for A in backtack same as length set in parameter
010 (Main stitch length).
4.0 mm = Stitch length for A in backtack can be choosen irrespective of the
main stitch length (parameter 010 ) (e.g. 4.0 mm).
-4.0 mm = When the stitch length for A in backtack is entered in the minus
range this part of the backtack will be done in reverse.
030 thread tension A 1
010 stitch length 1
020 foot stroke 1
041 speed
027 automatic stroke switch
according to sewing speed
031 thread tension A 2
038 2 nd tension level when
switched to 2 nd stroke
039 release tension on
foot lift
150 thread trimming
153 trim stitch tension
158 trim stitches
159 trim stitch length
050 foot pressure
074 foot position on stop
077 needle position on stop
110
stitch in stitch
140 backtack or condensed
stitches at seam end
120 backtack or condensed
stitches at seam start
100
thread clamp
135 bobbin thread counter
021 foot stroke 2
121 A stitch count
122 B stitch count
123 A/B repetition
124 A stitch length
125 B stitch length
126
A/B speed
141 C stitch count
142 D stitch count
143 C/D repetition
144 C stitch length
145 D stitch length
146 C/D speed
028 automatic stroke switch
speed threshold
029 automatic stroke switch
delay
032 thread tension B 1
034
thread tension based
on material thickness
070 foot lift height
» SEWING PARAMETER
033 thread tension B 2
054 dynamic foot pressure
066 Edge guide hight
060 edge value