VETRON 5000, Инструкция по эксплуатации

Страница: 57 / 83

55
07/2020
VETRON 5000/5100 - FLAT BED MACHINE - INSTRUCTION BOOK
05. PROGRAMMING
04. PROGRAM PARAMETER
-14-14
NR. PARAMETER DESCRIPTION
» SEAM END
150 Thread trimming
You can choose between:
OFF = Thread trimmer is inactive.
ON = Thread trimmer is active.
153
Trim stitch tension
(Only for Sub Class -11)
You can choose between:
-1 = Thread tension by trimming
0-100% = Thread tension released
Thread tension value
157
Reserved
(Only for Sub Class -11)
Thread trimming tension, adjustable:
-2 = The same thread trimming tension as the sewing thread tension
-1 = Released thread tension
0-100 = Thread trimming tension in %
158 Trim stitches
Extra stitches before thread trimming, released by trimming.
Adjustable between OFF and 100 stitches
159
Trim stitch length Stitch length setting for the setted trim stitch.
160 Backturn
You can choose between:
OFF = Backturn is inactive.
ON = Backturn is active.
NR. PARAMETER DESCRIPTION
» CHAIN PROGRAM
999 Chain program
This parameter will show if a progam is used in a chain program.
INFO!
A chain program can be used when different operations on a work piece
are done one after the other. The machine will set itself automatically for
the next work step.
NR. PARAMETER DESCRIPTION
» END BACKTACK
145
D Stitch lenght
You can choose between:
STD = Stitch length for B in backtack same as length set in parameter
010
(Main stitch length).
4.0 mm = Stitch length for B in backtack can be choosen irrespective of the
main stitch length (parameter 010 ) (e.g. 4.0 mm).
-4.0 mm = When the stitch length for B in backtack is entered in the
minus range this part of the back tack will done in reverse.
146 CD speed 800 S/min = Can be set between 50 – 2000 S/min (e.g. 800 S/min)