Veterinary Ventures Drinkwell 360, Руководство по эксплуатации

Страница: 5 / 13

www.petfountain.com
FOUNTAIN: CLEAN ONCE A WEEK
(for identification of parts in bold refer to parts diagram on page 1)
1) Unplug fountain from electrical source and disconnect the inline plug.
(see Fig. 1)
2) Remove the flow control cap and spout ring .
3) Remove the filter housing by twisting the filter housing to the counter
clockwise to the unlock position. Lift directly up and set aside.
4) Empty the water out of the fountain.
5) Once the fountain is empty, remove the cone piece by twisting to the
counter clockwise to unlock the tabs. Lift up and set aside. (refer to Fig.
2 and 4)
FOUNTAIN DISASSEMBLY & CLEANING
The Fountain Must Be Cleaned Regularly To Continue Working Normally!
FILTERS:
1) Filters should be changed approximately every two weeks. Replace filters
more frequently when using the fountain for multiple pets or pets that
produce a lot of saliva.
2) Filters are an added feature of the fountain. Their use is not required for
normal operation.
3) For replacement filters, visit a pet store near you or call 866-322-2530.
6) Next, flip the bowl upside down and unhook the electrical cord from the
two cord clips. (See Fig. 13a) This will allow you to pull the cord through
the Cord Pass-Through in the bowl.
Fig. 13a
Cord Pass-Through
Fig. 13b
Cord Clips