Veterinary Ventures Drinkwell 360, Руководство по эксплуатации

Страница: 7 / 13

www.petfountain.com
1) Remove pump from the fountain as explained in the “Fountain and
Disassembly and Cleaning” section. (specifically steps 6 & 7)
2) Once the motor is out of the fountain, with your thumb and forefinger,
gently squeeze on either side of the intake plate, and pull off. It may be
necessary to insert a fingernail into the seam of the intake plate to pry it
off.
3) Next you will want to remove the stator by placing your finger nail under
the small lip located on the narrow side of tear drop shaped stator and
pull out.
Stator
Pull-Tab
5) Once the stator is removed you can
also remove the impeller (3 white-
bladed propeller) which is held
in place magnetically. To remove
the impeller use a fingernail to get
under the plastic blade and lift out.
6) Once the motor is disassembled
you can clean the parts with warm
soapy water. Use a cotton swab (Q-Tip)
or the Drinkwell
®
Cleaning Kit
“Motor Brush” to get into the motor
cavity and remove any build-up. For added disinfecting and hard water
removal, clean the motor with a 10% white vinegar & 90% water solution.
Be sure to rinse thoroughly with fresh water.
7) Once the parts are clean you can reassemble the motor for use.
a) Replace the impeller
b) Replace the stator
c) Replace the intake plate.