26
PROBLEM
CAUSE
SOLUTION
Motor is continuo-
usly working.
Motor works more under the
following cases: When the tem-
perature is set to a higher value
than necessary
When large amounts of hot food
are placed
Ambient temperature is very high
Doors left ajar for a very long time
or opened frequently.
After the installation of the app-
liance or when it is left non-
operational for a longer time.
This is quite normal.
An ice layer is
developing in the
section.
Air holes might be blocked.
Check that the air holes are not
blocked by the food and place
them inside the appliance with
sufficient space around allowing
proper ventilation. Ensure that the
door is closed firmly. Refer to the
section "Cleaning and Maintenan-
ce" to remove ice.
Interior tempera-
ture is too low.
Temperature might be set to low. Increase the temperature by refer-
ring to "Usage" section.
Water drips on the
ground.
Water tray (located at the back
on the bottom side) level setting
might not be set properly or the
discharge opening (under the
front face of the compressor bin)
might be not properly placed as to
guide the water into this tray or the
water outlet might be completely
blocked.
You might need to move your
appliance from the wall to check
the tray and discharge opening.
Light is not opera-
tional.
LED lamp might be damaged.
Refer to Changing the LED lamp
in the Cleaning and Maintenance
section.
Control system might be deacti-
vated the lights since the door is
left open for a long time.
Close the door and reopen it to
activate the lights again.
