Vestax PMC-05Pro, Руководство пользователя

Страница: 8 / 16

18
19
25
24
28
27
30
20
17
21
22
26
29
23
31
-7-
SAMPLER/DELAY SECTION
!7 SAMPLER/DELAY SELECT SWITCH
This switch selects the effecter function to either
sampler or delay.
Moreover, in the sampler side, either Pre I.F.
(before a inputfader) or Post C.F. (after a
crossfader) can be chosen which signal is
effected with the same switch.
!8 DELAY TIME
It is the volume which sets up delay time roughly
(0.5msec - 1450msec).
TAP/PLAY switch can also set up the delay time.
The priority is given to the direction operated at
latest.
!9 FINE
It is the volume which sets up delay time finely
(0msec - 90msec).
@0
FEEDBACK
It is the volume which adjusts the amount of
feedbacks (time of repeat). The number of times
becomes 1 time when the pot turned to the left,
and the number of times increases when the pot
turns to the right.
@1
REC SWITCH
It is the switch which operates stop and start of
recording. REC indicator lights up during
recording. Over dubbing will be started when this
REC switch is pushed during LOOP playback.
The maximum recording time is 23.8 seconds. If
it records 11.9 seconds and more, you can not
use overdubbing function. If 11.9 seconds and
23.8 seconds are approached, an indicator will
blink.
@2 REC INDICATOR
It is the indicator which tells a recording
operation. If recording time passes over 8.9
seconds, it will warn with indicator starting blink
and tells approaching marginal time (11.9
seconds) of over dubbing. Moreover, if it passes
over 20.8 seconds , it will warn with indicator
starting blink again of approaching 23.8 seconds
of the longest recording time.
@3 OVERDUB DELETE SW
It is the switch which deletes the phrase of over-
dubbing. If this OVERDUB DELETE switch is
pushed during LOOP playback, it will leave only
the phrase recorded first and the phrase of over
dubbing will be deleted.
@4 LOOP SWITCH
It is the switch which operates LOOP mode. If a
switch is pushed, it will be set as loop playback
mode and LOOP indicator will light up.If this
LOOP switch is pushed during loop playback,
loop playback stops and it will be in a loop
playback standby.(Loop playback mode is not
canceled at this time.) If this LOOP switch is
pushed during loop playback standby, loop
playback mode will be canceled.
@5 LOOP INDICATOR
It is the indicator which tells ON/OFF in loop
playback mode. When loop playback mode is
ON, an indicator lights up.
ore
the
tion
el of
are
the
l be
ide.
both
ader
en it
the
ach
the
gnal
the
M-1
orm
CT
r of
jack
ON,
gnal
l of
OR
the
l of
Notes
When SAMPLER/DELAY SELECT switch is set
up to other than DELAY mode, it dose not work.
Notes
When SAMPLER/DELAY SELECT switch is set
up to other than DELAY mode, it dose not work.
Notes
When SAMPLER/DELAY SELECT switch is set
up to other than DELAY mode, it dose not work.
Notes
When SAMPLER/DELAY SELECT SWITCH is
set up to other than SAMPLER mode, it dose
not work.
he
ot
PMC05ProSL-E 04.7.13 11:22 AM ページ 8