-10-
HOW TO USE THE SAMPLER/DELAY
Delay
Please check before operation that sound has come out from a MIXER or the connected speaker.
1.Set it as DELAY mode
SAMPLER/DELAY SELECT switch is set to a "DELAY"
side.
2. Set up delay time
Strike TAP switch several times, listening to music source
if you want to set delay by the speaker or headphone. (At
this time, the button blinks according to the tempo that the
button struck.)
3. Choose the channel to which
an effect is applied
It checks that pushed PGM EFFECT switch of the channel
(PGM-1 or 2) you want to effect,
and check PGM EFFECT indicator is lights up and listen
to the effect sound by pushing EFFECT CUE SWITCH.
(
caution
: If the LEVEL/PLAY VOLUME is minimum, you
can't monitor effect sound. Please set LEVEL/PLAY
VOLUME to suitable level.)
4. Apply the effect.
An original sound (sound which had come out of the
speaker from the first), and add the effect sound by raising
MIX volume and LEVEL/PLAY volume. At this time, if
CURVE switch is set to the "A" side, effect sound can be
mixed gradually.
SAM
NOR
PMC05ProSL-E 04.7.13 11:22 AM ページ 11
