-11-
Y"
rce
(At
the
nel
ten
you
AY
the
ing
, if
be
1. Set it as SAMPLER mode.
SAMPLER/DELAY SELECT switch is set to a "PRE-I.F"
or"PRE-C.F"side. You can record the signal passed before
inputfader on PRE-I.F,and the signal passed before
crossfader on PRE C.F.
2. Select the channel to record
Please push PGM EFFECT switch of the channel (PGM-1
or 2) you want to record. And check PGM EFFECT
indicator lights up.
3. Record
REC switch is pushed hearing the output sound from
headphone or a speaker, and recording is started.
Recording will be stopped if a REC switch is pushed
again. (Keep in mind that you can't use overdubbing
function when you record over 11.9 seconds.)
REC INDICATOR blinks when the limit of overdubbing is
coming. If you continue the recordings over the limit of
over dubbing, indicator blinks again when the limit of
recording time is coming.
4. PLAYBACK
Set MIX volume to suitable level.
Playback starts at the same time LEVEL/PLAY VOLUME
is raised. By pushing LOOP switch, loop playback will
starts.
SAMPLER
NORMAL RECORDING
PMC05ProSL-E 04.7.13 11:22 AM ページ 12
