fig.a
fig.c
TOP P
MAIN
-12-
OVER DUBBING
1.Turn on loop playback mode
Push LOOP switch and set to loop playback mode.
(Please check that the LOOP indicator is on at this time.)
2. Start loop playback
LEVEL/PLAY volume is raised and playback is started.
3. Select the channel to record
Push switch that you want to record and check the
EFFECT indicator is on.
4. Over dubbing
During loop playback, push REC switch at the point you
want to start over dubbing. Over dubbing will be stopped if
a REC switch is pushed again. (In case a scratch play is
recorded, when both hands are full, it is convenient that a
foot pedal is connected to FOOT jack and you can use it
as a REC switch.)
5. Playback
When you raise MIX fader with LEVEL/PLAY volume being
raised, playback starts at the same time.
■Ho
①A
L
L
②A
N
f
③A
p
u
p
④
c
c
⑤
⑥
⑦
s
HO
PMC05ProSL-E 04.7.13 11:22 AM ページ 13
