Installation instructions
1. Carefully pull to remove the cover cap of the
Vestamatic
Markise
Plus 500 V 2.0
sunshade control.
2. Remove the screws and separate supporting frame from housing.
3. Always mount the delivered supporting frame and please take
notice of the frame position. There are several holes available for
different switch boxes as well as for the wall mounting.
Please note
also the position of the combination frame Jung CD 500, alpine-
white.
G
-
31 -
Installation instructions
4. Perform the wiring according to the wiring diagram (please see
page 51).
Attention: Currently valid VDE standards must be observed
when connecting the device, in particular DIN VDE
0100/0700 as well as the currently valid regula-
tions of your local power company and accident
prevention regulations.
5. Set the operation mode (please see page 34) and the wind speed
threshold value (please see page 35).
6. Slide the basic housing carefully into the supporting frame (make
sure not to pinch any cables) and tightly fasten the screws.
Important: Parallel control of several conventional drive motors can
only be implemented by means of isolating relays or
group control devices.
G
-
32 -
