Vestamatic Markise Plus 500 V2.0, Инструкция по установке и эксплуатации, Страница: 19 / 26

Setting the motor run time
G - 38 -
Setting the motor run time
The setting for the motor run time depends on size and design of
sunshade. The motor run time of
Vestamatic
Markise Plus 500 V 2.0
sunshade control can be adjusted to the actual run time of the sun-
shade. We recommend this adjustment for the sunshade drives to be
able to perform a tilting function in the automatic and manual mode to
position the slat angle of the blinds directly after the motor run time
has elapsed.
If more than one sunshade control is triggered, the setting of the
motor run time and the tilting time depends on the functionality of the
series connected motor control units.
The preset default setting for the motor run time extracting is
180 seconds.
The running time retract is general 180 seconds.
(Exception: IDS-Function).
(DIP switch on the front side of the device)
Yqwer%&/(X
Example for the DIP switch setting:
motor run time 180 seconds
The DIP switches S1 – S4 are all desig-
nated for setting the tilting pulse
(please see page 39).
G - 37 -
S5 S6 S7 S8 motor run time
in seconds
OFF OFF OFF OFF IDS-Function*
OFF OFF OFF ON 10
OFF OFF ON OFF 15
OFF OFF ON ON 18
OFF ON OFF OFF 21
OFF ON OFF ON 24
OFF ON ON OFF 27
OFF ON ON ON 30
ON OFF OFF OFF 35
ON OFF OFF ON 40
ON OFF ON OFF 50
ON OFF ON ON 60
ON ON OFF OFF 80
ON ON OFF ON 100
ON ON ON OFF 120
ON ON ON ON 180
* Only combined with decentralized IDS controller.