7
2. Seal Button
- From Standby mode, press the “Seal” button to set the
desired seal time. Press the "
▲
" or "
▼
" button to increase or
decrease the sealing time from 0 to 6 seconds. All vacuum
sealing modes use this sealing time setting. Press the “Start/Stop”
button to begin sealing
- While vacuuming in either the Smart Vac, Customized Vac,
Vac&Seal, Pulse Vac, or Marinate modes, press the “Seal” button
to seal right away.
3. Vac&Seal Button
- From Standby mode, press this button to select external
vacuum sealing mode. The display will show ‘0.0’ and the
vacuum seal process will begin once the lid is closed and the
“Start/Stop” button is pressed.
4. PulseVac Button
- From Standby mode, press this button to select Pulse Vac
mode for external vacuuming. The display will show ‘P’ and after
closing the lid, press and hold this button for different lengths of
time to obtain different vacuum levels.
5. Marinate Button
- From Standby mode, press the “Marinate” button to enter
marinate mode. Press the "
▲
" or "
▼
" button to increase or
decrease the number of 9-minute cycles from 1 to 11 cycles (9 to
99 minutes). Each cycle contains 3 steps: vacuum, hold, and
release. Close the lid and press the “Start/Stop” button to begin
the Marinate process.
