VESPA LXV 50, Руководство по обслуживанию станции

Страница: 50 / 162

D. fuel gauge
E. Instrument panel lighting
F. High-beam warning light
G. headlight warning light
H. turn indicator warning light
Checks and inspections
All the control operations of the system that entail disconnecting cables (to check connections and the
devices making up the ignition circuit) must be done with the engine off: if this is not done, the controls
might be irreparably damaged.
Ignition circuit
1) Check the condition of the spark plug (clean it
with a metal brush, remove deposits,
blast it with a jet of compressed air and replace it
if necessary).
2) Without removing the stator, carry out the fol-
lowing checks:
After visually checking the electrical wiring, per-
form measurements on the loading coil, the pickup
and the continuity using the appropriate tester.
If checks on the loading reel, pickup and continuity
show abnormalities, replace the stator; otherwise
replace the central unit.
Remember that disconnections due to replace-
ment of the central unit must be done with the
engine off.
Specific tooling
020331Y Digital multimeter
P
ICK
-U
P CHECK
Specification Desc./Quantity
1 Red cable (1) and White cable (2) 90 ÷ 140 Ohm
R
ELOADING COIL CHECK
Specification Desc./Quantity
1 Red cable (3) and Green cable (4) 800 ÷ 1100 Ohm
Electrical system
Vespa LXV 50
ELE SYS - 50