VESPA LXV 50, Руководство по обслуживанию станции

Страница: 35 / 162

Headlight adjustment
Proceed as follows:
1 . Place the vehicle in running order and with the
tyres inflated to the prescribed pressure, on a flat
surface 10 m away from a white screen situated in
a shaded area, making sure that the longitudinal
axis of the scooter is perpendicular to the screen;
2 . Turn on the headlight and check that the bor-
derline of the projected light beam on the screen
is not lower than 9/10 of the distance from the
ground to the centre of vehicle headlamp and high-
er than 7/10;
3 . If it is, loosen the headlight support fixing screws
and adjust the headlight direction.
N.B.
THE ABOVE PROCEDURE COMPLIES WITH THE EURO-
PEAN STANDARDS REGARDING MAXIMUM AND MINI-
MUM HEIGHT OF LIGHT BEAMS. REFER TO THE STATU-
TORY REGULATIONS IN FORCE IN EVERY COUNTRY
WHERE THE vehicle IS USED.
SAS filters inspection and cleaning
Remove the right side fairing by undoing the 2
screws marked « B » indicated in the figure.
Remove the two screws « A » from the aluminium
SAS cover. Release the metal tube from the rub-
ber housing on the cover without extracting the
tube from the cover/sleeve. Remove the tab and
plastic cover, extract the sponge and wash it in
water and soap. Dry it with compressed air before
refitting it, making sure to correctly fit the tab in the
housing on the two plastic and aluminium covers.
Every time you disassemble the filter, replace the
O-ring seal located in the cover.
Vespa LXV 50
Maintenance
MAIN - 35